MACKMA BM34 Non Mandrel Tube & Pipe Bender
Machine InformationManufacturer: MACKMA
Type: Tube & Pipe Bender
Model: BM 34-SA
Type of Seller: Dealer
The BM34 Bending Machine is THE ONLY non mandrel pipe bending machine able to bend tubes and pipes to the left or right, by means of a reversible die holder.
The innovative design allows the bending of pipes up to 33,4 mm in diameter and 3,38 mm in wall thickness. With a maximum of 170 mm centre line radius it is capable of maximum performance for this size of machine, even in the most demanding markets.
The bend rotation speed [2 to 3 RPM] is monitored by a dedicated inverter, to ensure the correct bending speed according to the diameter and thickness of the tube.
The modular design of the bending shaft assembly also allows the use of most competitors tooling, reducing long term tooling costs.
The inverter-controlled motor reduces energy consumption to a minimum.
The machine is mounted on precision casters for effortless movement around busy workshops and sites.
Mackma uses only 100% high quality Italian components to ensure long-term reliability.
Testament to the high quality of their machines is Mackma’s standard 2 year parts warranty.
|Pipe Max Outer Diameter||38||mm|
|Diameter using FE – 42 daN/mq||33,4×3,38||mm|
|Diameter using FE – 35 daN/mq||38×2||mm|
|Diameter using AISI 304/316 – 65 kg/mq||33,4×1,5||mm|
|Max curvature angle||180°|
|Minimum rotation speed||2||rpm|
|Maximum rotation speed||3||rpm|
|Bending direction||rightward||and leftward|
|Max installed power||0,55||KW|
Disclaimer: The information and specifications listed on this page are believed to be accurate, and are the responsibility of the company and or Individual representing the item being shown. Photographic representation are for illustrative pruposes only and may not be the actual machine and/or equuiptment being referred to. Steel Marketplace is not responsible for any typographical or errors that may exist.