OMNI MACHINE INC.: New 120″ x 78″ MaviJet CNC High Pressure Waterjet Cutting System

Request More Information

Request a Quote

Request more information from the seller by filling out this form.

Machine Information

Manufacturer: Mavijet
Type: CNC Waterjet
Model: OMMJTW33020
Year: 2022
Condition: New
Quantity: 3
Type of Seller: Dealer


Mavijet Waterjet Cutting Technology, can process cold cutting of all kinds of materials (Glass, Marble, Granite, Ceramics, Aluminum, Plastics, Rubber, Wood, Mild Steel, Hardox, Titanium, All Composites, Clothing, Cake etc..) with low tolerances without causing electrical, chemical and optical reaction. The Cutting process is 100% accurate and is realized with the power generated by mixing highly pressurized water (up to 6000 bars) and abrasive sand.  With Mavijet, you can cut 11.8″ thickness for Aluminum, 9.8″ thickness Mild Steel and 7.87″ Stainless Steel.  MAVIJET is one of few High Pressure Pump Manufacturers in the world, with their own design and brand, produces 3 axis, 5 axis, 6 axis Waterjet Cutting Machines as well as 5 axis and 6 axis CNC Milling Machines.

Their 3 Axis CNC Waterjet can cut materials up to 7.87″ thickness without the need to change nozzles. Not only for thick but also for thin materials, it  can adapt to 90 degrees, narrow angular and small radius precise cutting.

  • Cutting Size:   
    • X-Axis:  118″
    • Y-Axis:  78″ 
    • Z-Axis:  9.8″
  • CNC Control Unit
    • ESA 3A_axis Controller
    • Ethernet & Network Interfaces
    • USB Port
    • Extra Manual Hand-Wheel (X,Y, & Z)
  • ESA Servo-Motors:
    • X-Axis:  1.5 kW
    • Y-Axis:  1.5 kW
    • Z-Axis:  0.75 kW
  • (THK Japan) Transmission System:  Helical Hardened Racks & Pinions
  • Linear Bearing:   Linear Slides & Rails
  • Step Accuracy:   0.01 mm
  • Rapid Traverse Speed:  78.74 ipm
  • Lubrication System:   Manual
  • CAM Program:   Nesting, Automatic Input-Outut System

High Pressure Waterjet Pump Specifications:

  • 4000 Bar (24 hrs, Non-stop Operation)
  • Motor:  50 HP
  • Motor Speed:  1500 rpm/60 hz
  • High Pressure Flow Rate:   0.97 Gals/min
  • Bosch Rexroth Hydraulic Pump:   27 Gallons 
  • Hydraulic Axial Piston Pump:   Maximum 200 Bar
  • Cooling Water Flow Rate:   7.92 gal/min
  • Optimum Water Inflow Pressure:   4 Bar
  • Adjustable Pressure Water Pump:   8-10 Bar
  • Orifice Diameters:  0.7″, 0.98″, 1.18″, 1.37″
  • Pump Dimensions (LxWxH):  72″ x 41″ x 48″

Abrasive Tank Specifications:

  • Abrasive Tank Maximum Load:  771 lbs.
  • Operating Pressure:   6 Bars
  • Sand Dosing System:   Adjustable from CNC Unit via Pasometer.

Sand Dosing System (Cutting Head & Mixing Chamber) Specifications:

  • Sand Flow Rate:   80 ~ 600 gr/min.

Equipped with:

  • High Pressure Waterjet Pump
  • Work Table
  • Abrasive Tank
  • Sand Dosing
  • Cutting Head
  • CAM
  • Controller
  • Manual

Disclaimer: The information and specifications listed on this page are believed to be accurate, and are the responsibility of the company and or Individual representing the item being shown. Photographic representation are for illustrative pruposes only and may not be the actual machine and/or equuiptment being referred to. Steel Marketplace is not responsible for any typographical or errors that may exist.

Steel Marketplace © 2024 - All Rights Reserved. Terms and Conditions

Niagara Website Design by Future Access Inc.